Просмотр продукта

The 6805 is a widely used metric deep groove size, and this full ceramic version is a прямое внесение размеров for existing 25×37×7 mm housings. It is specified in полупроводниковое оборудование, медицинское оборудование, химическая обработка, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.

Ключевые особенности:

1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown

The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, соленая вода, и большинство кислот и щелочей, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.

2. Zero Lubrication – Zero Contamination

The 6805 полностью керамические ходы полностью сухой. В вакуумной камере не выделяется смазка., no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in semiconductor, медицинский, и оборудование для чистых помещений where lubricant contamination is unacceptable.

3. Chemically Inert – Acids, Alkalis, and Saltwater

ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in кислый, щелочной, and saline environments. Это делает 6805 suitable for химические насосы, plating systems, marine drives, и пищевое оборудование where steel bearings corrode rapidly.

4. Немагнитный и электроизоляционный

Zirconia exhibits zero magnetic permeability (μ ≈ 0) и electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, чувствительные приборы, and electric motor applications.

5. Высокотемпературная стабильность

The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500°С continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, высокотемпературные печи, and kiln conveyor systems.

6. Hardness and Low Friction

Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains ниже 0.25, reducing startup torque and energy loss in low-load precision systems.

Приложения

The 6805 полностью керамический подшипник используется там, где выходят из строя стальные подшипники., загрязнять, или требуют обслуживания:

  • Полупроводниковое и оборудование для чистых помещений – Обработка пластин, вакуумное напыление, и этапы проверки. Dry running eliminates lubricant outgassing.

  • Медицинское и фармацевтическое оборудование – Diagnostic equipment, автоматизация лаборатории, and sterile filling systems. Немагнитный, автоклавируемый, и без смазки.

  • Химическое и гальваническое оборудование – Насосы, клапаны, и направляющие, подвергающиеся воздействию кислот, щелочи, и гальванические ванны. ZrO₂ races and balls resist chemical attack.

  • Высокотемпературное оборудование – Печные конвейеры, вагонетки для печей, and heat-treatment fixtures operating beyond the limits of grease and steel.

  • Производство продуктов питания и напитков – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.

  • Морское и подводное оборудование – Subsea actuators, ROV components, and saltwater-exposed linkages.

Отзывы

Пока нет отзывов.

Будьте первым, кто оставит отзыв»6805 25×37×7 мм Полностью керамический (ZrO2) Радиальный шарикоподшипник”

Ваш адрес электронной почты не будет опубликован. Обязательные поля отмечены