6805 Full Ceramic Thin Scetion Bearing – 25×37×7 mm, 100% Zirconia Races & Balls. Runs completely dry with no lubrication. Non-magnetic, electrically insulating, and chemically inert to acids, alkalis, and saltwater. A direct dimensional drop-in for steel 6805 bearings in semiconductor, medical, chemical, and high-temperature equipment.
Model: 6805 Full Ceramic (ZrO2) / 6805CE
Bore Diameter (d): 25 mm / 0.984 in
Outer Diameter (D): 37 mm / 1.457 in
Width (B): 7 mm / 0.276 in
Race Material: Zirconium Oxide (ZrO2) ceramic
Ball Material: Zirconium Oxide (ZrO2) ceramic, G5 precision grade
Cage Material: Zro2 / PTFE
Weight: Approx. 16–18 g
The 6805 is a widely used metric deep groove size, and this full ceramic version is a direct dimensional drop-in for existing 25×37×7 mm housings. It is specified in semiconductor equipment, medical devices, chemical processing, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.
1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown
The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, saltwater, and most acids and alkalis, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.
2. Zero Lubrication – Zero Contamination
The 6805 full ceramic runs completely dry. There is no grease to outgas in a vacuum chamber, no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in semiconductor, medical, and cleanroom equipment where lubricant contamination is unacceptable.
3. Chemically Inert – Acids, Alkalis, and Saltwater
ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in acidic, alkaline, and saline environments. This makes the 6805 suitable for chemical pumps, plating systems, marine drives, and food processing equipment where steel bearings corrode rapidly.
4. Non-Magnetic and Electrically Insulating
Zirconia exhibits zero magnetic permeability (μ ≈ 0) and electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, sensitive instrumentation, and electric motor applications.
5. High-Temperature Stability
The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500°C continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, high-temperature ovens, and kiln conveyor systems.
6. Hardness and Low Friction
Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains below 0.25, reducing startup torque and energy loss in low-load precision systems.
The 6805 full ceramic bearing is specified where steel bearings fail, contaminate, or require maintenance:
Semiconductor and Cleanroom Equipment – Wafer handling, vacuum deposition, and inspection stages. Dry running eliminates lubricant outgassing.
Medical and Pharmaceutical Machinery – Diagnostic equipment, laboratory automation, and sterile filling systems. Non-magnetic, autoclavable, and lubricant-free.
Chemical and Plating Equipment – Pumps, valves, and guides exposed to acids, alkalis, and plating baths. ZrO₂ races and balls resist chemical attack.
High-Temperature Machinery – Furnace conveyors, kiln carriages, and heat-treatment fixtures operating beyond the limits of grease and steel.
Food and Beverage Processing – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.
Marine and Underwater Equipment – Subsea actuators, ROV components, and saltwater-exposed linkages.
Sending...
Reviews
There are no reviews yet.