Produktansicht

Der 6805 is a widely used metric deep groove size, and this full ceramic version is a direct dimensional drop-in for existing 25×37×7 mm housings. It is specified in Halbleiterausrüstung, medizinische Geräte, chemische Verarbeitung, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.

Hauptmerkmale:

1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown

The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, Salzwasser, und die meisten Säuren und Laugen, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.

2. Zero Lubrication – Zero Contamination

Der 6805 Vollkeramikläufe völlig trocken. In einer Vakuumkammer gibt es kein Fett, das ausgasen könnte, no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in semiconductor, medizinisch, und Reinraumausrüstung where lubricant contamination is unacceptable.

3. Chemically Inert – Acids, Alkalis, and Saltwater

ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in sauer, alkalisch, and saline environments. Das macht das 6805 suitable for Chemiepumpen, plating systems, marine drives, und Lebensmittelverarbeitungsgeräte where steel bearings corrode rapidly.

4. Nicht magnetisch und elektrisch isolierend

Zirconia exhibits zero magnetic permeability (μ ≈ 0) Und electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, empfindliche Instrumentierung, and electric motor applications.

5. Hochtemperaturstabilität

The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500°C continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, Hochtemperaturöfen, and kiln conveyor systems.

6. Hardness and Low Friction

Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains unten 0.25, reducing startup torque and energy loss in low-load precision systems.

Anwendungen

Der 6805 Vollkeramiklager werden dort eingesetzt, wo Stahllager versagen, verunreinigen, oder eine Wartung erfordern:

  • Halbleiter- und Reinraumausrüstung – Wafer-Handling, vacuum deposition, and inspection stages. Dry running eliminates lubricant outgassing.

  • Medical and Pharmaceutical Machinery – Diagnostic equipment, laboratory automation, and sterile filling systems. Nicht magnetisch, autoklavierbar, und schmiermittelfrei.

  • Chemie- und Galvanisierungsausrüstung – Pumpen, Ventile, und Führungen, die Säuren ausgesetzt sind, Alkalien, und Galvanisierungsbäder. ZrO₂ races and balls resist chemical attack.

  • Hochtemperaturmaschinen – Ofenförderer, kiln carriages, and heat-treatment fixtures operating beyond the limits of grease and steel.

  • Lebensmittel- und Getränkeverarbeitung – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.

  • Marine and Underwater Equipment – Subsea actuators, ROV components, and saltwater-exposed linkages.

Rezensionen

Es liegen noch keine Bewertungen vor.

Seien Sie der Erste, der eine Bewertung abgibt:6805 25×37×7 mm Full Ceramic (ZrO2) Rillenkugellager”

Ihre E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert