Visualizzazione del prodotto

IL 6805 is a widely used metric deep groove size, and this full ceramic version is a drop-in dimensionale diretto for existing 25×37×7 mm housings. It is specified in apparecchiature per semiconduttori, dispositivi medici, lavorazione chimica, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.

Caratteristiche principali:

1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown

The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, acqua salata, e la maggior parte degli acidi e degli alcali, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.

2. Zero Lubrication – Zero Contamination

IL 6805 percorsi interamente in ceramica completamente asciutto. Non c'è grasso che degassisce in una camera a vuoto, no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in semiconduttore, medico, and cleanroom equipment where lubricant contamination is unacceptable.

3. Chemically Inert – Acids, Alkalis, and Saltwater

ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in acido, alcalino, and saline environments. Questo rende il 6805 suitable for pompe chimiche, plating systems, marine drives, e attrezzature per la lavorazione degli alimenti where steel bearings corrode rapidly.

4. Non magnetico ed elettricamente isolante

Zirconia exhibits zero magnetic permeability (μ ≈ 0) E electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, strumentazione sensibile, and electric motor applications.

5. Stabilità alle alte temperature

The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500°C continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, forni ad alta temperatura, and kiln conveyor systems.

6. Hardness and Low Friction

Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains sotto 0.25, reducing startup torque and energy loss in low-load precision systems.

Applicazioni

IL 6805 il cuscinetto interamente in ceramica è specificato laddove i cuscinetti in acciaio si guastano, contaminare, o richiedere manutenzione:

  • Attrezzature per semiconduttori e camere bianche – Movimentazione dei wafer, deposizione sotto vuoto, e fasi di ispezione. Dry running eliminates lubricant outgassing.

  • Macchinari medici e farmaceutici – Diagnostic equipment, automazione del laboratorio, and sterile filling systems. Non magnetico, autoclavabile, e senza lubrificanti.

  • Attrezzature chimiche e galvaniche – Pompe, valvole, e guide esposte agli acidi, alcali, e bagni galvanici. ZrO₂ races and balls resist chemical attack.

  • Macchinari ad alta temperatura – Trasportatori del forno, carri del forno, and heat-treatment fixtures operating beyond the limits of grease and steel.

  • Lavorazione di alimenti e bevande – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.

  • Attrezzatura marina e subacquea – Subsea actuators, ROV components, and saltwater-exposed linkages.

Recensioni

Non ci sono ancora recensioni.

Sii il primo a recensire “6805 25×37×7 mm Full Ceramic (ZrO2) Cuscinetto a sfere a gola profonda”

Il tuo indirizzo email non verrà pubblicato. I campi obbligatori sono contrassegnati