製品ビュー

の 6805 is a widely used metric deep groove size, and this full ceramic version is a direct dimensional drop-in for existing 25×37×7 mm housings. It is specified in 半導体装置, 医療機器, 化学処理, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.

主な特長:

1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown

The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, 塩水, ほとんどの酸とアルカリ, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.

2. Zero Lubrication – Zero Contamination

の 6805 フルセラミックラン 完全に乾燥した. 真空チャンバー内でグリースがガスを放出することはありません, no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in 半導体, 医学, and cleanroom equipment where lubricant contamination is unacceptable.

3. Chemically Inert – Acids, Alkalis, and Saltwater

ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in 酸性の, アルカリ性, and saline environments. これにより、 6805 suitable for ケミカルポンプ, plating systems, marine drives, および食品加工装置 where steel bearings corrode rapidly.

4. 非磁性かつ電気絶縁性

Zirconia exhibits zero magnetic permeability (μ ≈ 0) そして electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, 機密性の高い計装, and electric motor applications.

5. 高温安定性

The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500℃ continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, 高温オーブン, and kiln conveyor systems.

6. Hardness and Low Friction

Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains 下に 0.25, reducing startup torque and energy loss in low-load precision systems.

アプリケーション

の 6805 スチールベアリングが故障した場合にはフルセラミックベアリングが指定されています, 汚染する, またはメンテナンスが必要です:

  • 半導体およびクリーンルーム装置 – ウェーハハンドリング, 真空蒸着, および検査段階. Dry running eliminates lubricant outgassing.

  • 医療および製薬機械 – Diagnostic equipment, 研究室の自動化, and sterile filling systems. 非磁性, オートクレーブ可能, 無潤滑.

  • 化学およびメッキ装置 – ポンプ, バルブ, 酸にさらされるガイド, アルカリ, およびメッキ浴. ZrO₂ races and balls resist chemical attack.

  • 高温機械 – 炉コンベア, 窯台車, and heat-treatment fixtures operating beyond the limits of grease and steel.

  • 食品および飲料の加工 – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.

  • 海洋および水中機器 – Subsea actuators, ROV components, and saltwater-exposed linkages.

レビュー

まだレビューはありません.

最初にレビューしてみませんか?6805 25×37×7 mm Full Ceramic (ZrO2) 深溝玉軸受”

あなたのメールアドレスは公開されません. 必須フィールドにマークが付いています