제품보기

그만큼 6805 is a widely used metric deep groove size, and this full ceramic version is a direct dimensional drop-in for existing 25×37×7 mm housings. It is specified in 반도체 장비, 의료기기, 화학 처리, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.

주요 특징:

1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown

The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, 바닷물, 그리고 대부분의 산과 알칼리, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.

2. Zero Lubrication – Zero Contamination

그만큼 6805 풀 세라믹 런 완전 건조. 진공 챔버에는 가스를 배출할 그리스가 없습니다., no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in 반도체, 의료, 및 클린룸 장비 where lubricant contamination is unacceptable.

3. Chemically Inert – Acids, Alkalis, and Saltwater

ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in 산성의, 알칼리성, and saline environments. 이는 6805 suitable for 화학 펌프, plating systems, marine drives, 및 식품 가공 장비 where steel bearings corrode rapidly.

4. 비자성 및 전기 절연성

Zirconia exhibits zero magnetic permeability (μ ≈ 0) 그리고 electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, 민감한 계측, and electric motor applications.

5. 고온 안정성

The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500℃ continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, 고온 오븐, and kiln conveyor systems.

6. Hardness and Low Friction

Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains 아래에 0.25, reducing startup torque and energy loss in low-load precision systems.

응용

그만큼 6805 강철 베어링이 고장난 경우 전체 세라믹 베어링이 지정됩니다., 오염시키다, 아니면 유지보수가 필요하거나:

  • 반도체 및 클린룸 장비 – 웨이퍼 핸들링, 진공 증착, 및 검사 단계. Dry running eliminates lubricant outgassing.

  • 의료 및 제약 기계 – Diagnostic equipment, 실험실 자동화, and sterile filling systems. 비자성, 오토클레이브 가능, 무윤활유.

  • 화학 및 도금 장비 – 펌프, 밸브, 산에 노출된 가이드, 알칼리, 그리고 도금 욕조. ZrO₂ races and balls resist chemical attack.

  • 고온 기계 – 퍼니스 컨베이어, 가마 마차, and heat-treatment fixtures operating beyond the limits of grease and steel.

  • 식품 및 음료 가공 – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.

  • 해양 및 수중 장비 – Subsea actuators, ROV components, and saltwater-exposed linkages.

리뷰

아직 리뷰가 없습니다..

가장 먼저 리뷰를 작성해 보세요.6805 25×37×7mm 풀 세라믹 (ZrO2) 깊은 홈 볼 베어링”

귀하의 이메일 주소는 공개되지 않습니다. 필수 입력란이 표시되어 있습니다