6805 Full Ceramic Thin Scetion Bearing – 25×37×7 mm, 100% Courses de zircone & Balles. Fonctionne complètement à sec sans lubrification. Non magnétique, isolant électrique, and chemically inert to acids, alcalis, and saltwater. Un drop-in dimensionnel direct pour l'acier 6805 bearings in semiconductor, médical, chimique, and high-temperature equipment.
Modèle: 6805 Pleine céramique (ZrO2) / 6805CE
Diamètre d'alésage (d): 25 mm / 0.984 dans
Diamètre extérieur (D): 37 mm / 1.457 dans
Largeur (B): 7 mm / 0.276 dans
Matériel de course: Oxyde de Zirconium (ZrO2) céramique
Matériau de la balle: Oxyde de Zirconium (ZrO2) céramique, G5 precision grade
Matériau de la cage: Zro2 / PTFE
Poids: Environ. 16–18 g
Le 6805 is a widely used metric deep groove size, and this full ceramic version is a installation dimensionnelle directe for existing 25×37×7 mm housings. It is specified in équipement semi-conducteur, dispositifs médicaux, traitement chimique, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.
1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown
The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, eau salée, et la plupart des acides et alcalis, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.
2. Zero Lubrication – Zero Contamination
Le 6805 pistes entièrement en céramique complètement sec. Il n'y a pas de graisse à dégazer dans une chambre à vide, no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in semi-conducteur, médical, et équipements de salle blanche where lubricant contamination is unacceptable.
3. Chemically Inert – Acids, Alkalis, and Saltwater
ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in acide, alcalin, and saline environments. Cela rend le 6805 suitable for pompes chimiques, plating systems, marine drives, et équipement de transformation des aliments where steel bearings corrode rapidly.
4. Non magnétique et isolant électrique
Zirconia exhibits zero magnetic permeability (μ ≈ 0) et electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, instruments sensibles, and electric motor applications.
5. Stabilité à haute température
The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500°C continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, fours à haute température, and kiln conveyor systems.
6. Hardness and Low Friction
Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains ci-dessous 0.25, reducing startup torque and energy loss in low-load precision systems.
Le 6805 un roulement entièrement en céramique est spécifié là où les roulements en acier échouent, contaminer, ou nécessitent un entretien:
Équipements pour semi-conducteurs et salles blanches – Manipulation des plaquettes, dépôt sous vide, et étapes de contrôle. Dry running eliminates lubricant outgassing.
Machines médicales et pharmaceutiques – Diagnostic equipment, automatisation de laboratoire, and sterile filling systems. Non magnétique, autoclavable, et sans lubrifiant.
Équipement chimique et de placage – Pompes, vannes, et guides exposés aux acides, alcalis, et bains de placage. ZrO₂ races and balls resist chemical attack.
Machines à haute température – Convoyeurs de four, chariots de four, and heat-treatment fixtures operating beyond the limits of grease and steel.
Transformation des aliments et des boissons – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.
Équipement marin et sous-marin – Subsea actuators, ROV components, and saltwater-exposed linkages.
Envoi...
Avis
Il n'y a pas encore d'avis.