6805 Full Ceramic Thin Scetion Bearing – 25×37×7 mm, 100% Carreras de circonio & Bolas. Funciona completamente seco sin lubricación.. No magnético, aislante electricamente, and chemically inert to acids, álcalis, and saltwater. Un descenso dimensional directo para el acero. 6805 bearings in semiconductor, médico, químico, and high-temperature equipment.
Modelo: 6805 Cerámica completa (ZrO2) / 6805CE
Diámetro interior (d): 25 milímetros / 0.984 en
Diámetro exterior (D): 37 milímetros / 1.457 en
Ancho (B): 7 milímetros / 0.276 en
Material de carrera: Óxido de circonio (ZrO2) cerámico
Material de la bola: Óxido de circonio (ZrO2) cerámico, Grado de precisión G5
Material de la jaula: Zro2 / PTFE
Peso: Aprox.. 16–18 g
El 6805 is a widely used metric deep groove size, and this full ceramic version is a entrada dimensional directa for existing 25×37×7 mm housings. It is specified in equipo semiconductor, dispositivos médicos, procesamiento químico, and high-temperature machinery where steel bearings either contaminate the process or fail prematurely.
1. Ten Times the Service Life – No Corrosion, No Lubricant Breakdown
The primary failure modes of a steel bearing are corrosion and lubricant degradation. ZrO₂ eliminates both. The races and balls are chemically inert to water, de agua salada, and most acids and alkalis, and the bearing runs without any lubricant that could wash out, oxidize, or attract contaminants. In comparable duty conditions, full ceramic bearings can achieve up to 10× the service life of standard steel bearings. In dry or contaminated environments, zirconia retains wear resistance over 3× longer than hardened stainless steel bearings.
2. Zero Lubrication – Zero Contamination
El 6805 full ceramic runs completamente seco. There is no grease to outgas in a vacuum chamber, no oil film to contaminate a semiconductor wafer or a pharmaceutical product, and no lubricant to wash out in a wet or washdown environment. This is why it is specified in semiconductor, médico, y equipos de sala limpia where lubricant contamination is unacceptable.
3. Chemically Inert – Acids, Alkalis, and Saltwater
ZrO₂ maintains structural integrity after 72 hours of immersion in NaOH and H₃PO₄, and resists degradation in ácido, alcalino, and saline environments. Esto hace que el 6805 suitable for bombas quimicas, plating systems, marine drives, y equipos de procesamiento de alimentos where steel bearings corrode rapidly.
4. No magnético y eléctricamente aislante
Zirconia exhibits zero magnetic permeability (μ ≈ 0) y electrical resistivity >10¹² Ω·cm, with dielectric strength exceeding 15 kV/mm. The bearing will not attract metallic debris, distort magnetic fields, or conduct stray currents that cause electrical erosion. This is critical for MRI-compatible equipment, sensitive instrumentation, and electric motor applications.
5. Estabilidad a altas temperaturas
The PTFE-caged 6805 full ceramic operates from -116°C to +200°C; full-complement (cageless) ZrO₂ designs can reach 500°C continuous and maintain >90% mechanical strength at 400°C. This covers cryogenic handling, hornos de alta temperatura, and kiln conveyor systems.
6. Hardness and Low Friction
Zirconia hardness is 1,200–1,350 HV, and the dry-running friction coefficient remains abajo 0.25, reducing startup torque and energy loss in low-load precision systems.
El 6805 Se especifica rodamiento cerámico completo donde fallan los rodamientos de acero., contaminar, o requieren mantenimiento:
Equipos de semiconductores y salas limpias – Manipulación de obleas, deposición al vacío, y etapas de inspección. Dry running eliminates lubricant outgassing.
Maquinaria Médica y Farmacéutica – Diagnostic equipment, automatización de laboratorio, and sterile filling systems. No magnético, esterilizable en autoclave, y sin lubricante.
Equipos químicos y de revestimiento – Bombas, valvulas, y guías expuestas a ácidos, álcalis, y baños de revestimiento. ZrO₂ races and balls resist chemical attack.
Maquinaria de alta temperatura – Transportadores de horno, carros del horno, and heat-treatment fixtures operating beyond the limits of grease and steel.
Procesamiento de alimentos y bebidas – Washdown conveyors and packaging mechanisms where rust and lubricant contamination are unacceptable.
Equipos marinos y submarinos – Subsea actuators, ROV components, and saltwater-exposed linkages.
Envío...
Reseñas
Aún no hay reseñas.