687 Full Ceramic Bearing – Runs completely dry with no lubrication. Non-magnetic, electrically insulating, and inert to water, saltwater, and most acids. Tolerates temperatures up to 180°C. A direct drop-in for steel 687 bearings in precision machinery, medical devices, robotics, and fishing reels where rust and friction cannot be tolerated.
| Model | 687 Full Ceramic (ZrO₂) |
| Bore Diameter (d) | 7 mm / 0.276 in |
| Outer Diameter (D) | 14 mm / 0.551 in |
| Width (B) | 5 mm / 0.197 in |
| Race Material | Zirconium Oxide (ZrO₂) ceramic |
| Ball Material | Zirconium Oxide (ZrO₂) ceramic |
| Cage Material | PTFE (standard) |
The 687 full ceramic (ZrO₂) bearing removes every one of those failure mechanisms by replacing all metallic components with yttria-stabilized zirconium oxide. No steel races, no steel balls. The result is a miniature bearing that runs completely dry, ignores corrosion, and maintains its precision in environments where conventional bearings seize or degrade.
1. Zero Lubrication, Zero Contamination – The 687 full ceramic runs completely dry. There is no grease to outgas in a vacuum chamber, no oil film to contaminate a semiconductor wafer, and no lubricant to wash out in a wet environment. For cleanroom, medical, and food-adjacent equipment, this eliminates an entire category of contamination risk.
2. Complete Immunity to Rust and Chemical Attack – ZrO₂ is inert to water, saltwater, and most acids and alkalis (the notable exceptions being hydrofluoric acid and hot concentrated sulfuric acid). The bearing can be immersed, washed down, or operated in corrosive atmospheres without surface degradation—something no steel bearing can claim.
3. Non-Magnetic and Electrically Insulating – The ceramic races and balls are non-magnetic and non-conductive. This makes the 687 suitable for MRI-compatible equipment, sensitive instrumentation, and applications where stray currents or magnetic interference would compromise performance.
4. High-Temperature Stability – Full ceramic construction tolerates temperatures up to 180°C, far beyond the practical limit of grease-lubricated steel bearings. This covers high-temperature machinery, ovens, and applications where frictional heat would otherwise degrade lubricant and raceway hardness.
5. Low Friction and Smooth, Quiet Operation – The glass-like ceramic surface and PTFE cage combine to produce ultra-low friction and smooth, quiet rotation. In miniature precision assemblies, this translates into lower starting torque, less vibration, and more consistent motion.
6. Lightweight for High-Speed Dynamics – At approximately 2.2 g, the 687 full ceramic is significantly lighter than its steel equivalent, reducing inertia in high-speed or high-cycle miniature mechanisms.
The 687 full ceramic bearing is specified where steel bearings fail, contaminate, or require maintenance:
Medical and Laboratory Devices – MRI-compatible mechanisms, surgical instrument components, dental equipment, and diagnostic sliders. Non-magnetic, autoclavable, and lubricant-free.
Semiconductor and Cleanroom Equipment – Wafer handling, vacuum stages, and inspection tools. Dry running eliminates lubricant outgassing and particle generation.
Chemical and Plating Equipment – Linkages, pumps, and guides exposed to acids, alkalis, and plating baths. The ZrO₂ races and balls resist chemical attack.
High-Temperature Machinery – Furnace conveyors, heat-treatment fixtures, and aerospace components operating near or above 180°C.
Precision Machinery and Robotics – Miniature joints, linear guides, and instrument components where low friction and non-magnetic properties are required.
Fishing Reels and Specialty Mechanisms – The 687 size is used in some fishing reel positions where corrosion resistance and low-friction rotation are valued.
Sending...
Reviews
There are no reviews yet.