CNC ロータリーテーブルに振動が発生した場合, 位置決めエラー, または負荷による過度の変形, ベアリングアセンブリは加工精度に直接影響する可能性があります. あ large diameter slewing bearing must provide sufficient load capacity and structural rigidity, especially when equipment handles axial forces, radial forces, 同時に傾く瞬間. しかし, not every bearing design meets the requirements of precision rotary applications.
深セン新昌勝軸受有限公司, 株式会社. (XCCZCベアリング) manufactures precision bearings for automation, 自動車, 医学, およびエネルギー応用. Its YRT series turntable bearings combine axial and radial roller arrangements to support demanding rotary positioning tasks. With available inner diameters ranging from 50 mmから 850 mm across the specified series, these bearings offer options for different machine designs. Understanding their construction, 精密等級, and mounting requirements helps you select a suitable solution for your equipment.
A large diameter slewing bearing supports rotational movement while carrying loads transferred between connected machine structures. In precision equipment, engineers must consider more than bearing diameter. They also need to evaluate stiffness, runout, 荷重方向, mounting accuracy, そして動作速度.
The YRT series is designed specifically for precision rotary tables and similar applications. Its three-row roller arrangement separates axial and radial load support.
The YRT design incorporates three roller rows:
This arrangement makes YRT bearings suitable for rotary tables that require stable positioning during milling, 研削, indexing, and inspection.
しかし, YRT turntable bearings are not interchangeable with every conventional slewing ring. You should confirm the required load capacity, 取付寸法, 回転速度, and precision specifications before selecting a model.
When evaluating a high precision bearing manufacturer, compare documented specifications against your equipment requirements rather than relying on product names alone.
| 仕様 | YRT Series Information | Selection Consideration |
|---|---|---|
| 内径 | 50–850 mm across the specified range | Match the shaft or central opening |
| 外径 | 80–1,090 mm across the specified range | Check available installation space |
| 身長 | 20–96 mm, サイズに応じて | Verify axial installation clearance |
| 精密級 | P4 and P2 options, subject to model availability | Match the required positioning accuracy |
| 材料 | GCr15 軸受鋼または肌焼き鋼, depending on design | Confirm material and heat-treatment specifications |
| 取り付け | Through-holes on inner and outer rings | Check bolt patterns and mounting surfaces |
| 潤滑 | グリース潤滑; special lubrication provisions may be available | Follow the selected model’s maintenance requirements |
These figures describe the supplied series information, not a guarantee that every model supports the entire dimensional range. ご注文の前に, request the dimensional drawing and model-specific technical data.
YRT precision rotary bearings support equipment that needs controlled rotation and resistance to combined loads.
During milling or grinding, cutting forces can create tilting moments that affect tool-to-workpiece positioning. A properly selected YRT bearing helps maintain rotary-table stiffness and repeatability. Engineers should verify permissible loads, runout, プリロード, and mounting accuracy for the actual operating conditions.
三次元測定機, 光学検査用ターンテーブル, and certain medical imaging assemblies require controlled rotation. これらのアプリケーションでは, bearing selection must account for runout, スムーズな動き, ノイズ, and the equipment’s full operating range.
Robotic rotary axes and antenna positioning systems may experience changing loads and repeated indexing cycles. The bearing must match the required moment stiffness, 回転速度, environmental conditions, and service requirements.

Choosing the right bearing architecture helps you avoid unnecessary redesign and performance problems.
| 特徴 | YRT Turntable Bearing | Conventional Deep Groove Ball Bearing | Crossed Roller Bearing |
|---|---|---|---|
| Axial load support | Designed for bidirectional axial loads | Depends on configuration and limitations | Depends on model and arrangement |
| Radial load support | Dedicated radial roller row | Supported within its rated limits | Supported by crossed roller arrangement |
| Tilting moment resistance | Designed for combined-load rotary applications | Often requires additional bearing arrangements | Can provide high rigidity, depending on design |
| Typical application | Precision rotary tables | General-purpose rotating machinery | Precision rotary axes and compact stages |
| 選択の優先順位 | Combined loads and rotary-table stiffness | General radial and moderate axial loading | Compact precision support and combined loading |
No design is universally superior. Your choice should depend on load calculations, installation geometry, 精度要件, スピード, and total system cost.
Follow these steps when specifying a large diameter precision rotary bearing.
This process helps you compare suitable models and reduces the risk of selecting a bearing based on dimensions alone.
に設立 2002, 深セン新昌勝軸受有限公司, 株式会社. focuses on precision bearing manufacturing and serves customers across multiple industrial sectors. Its stated capabilities include customized bearing designs, OEMサービス, エンジニアリングサポート, and quality inspection.
サプライヤーを評価する場合, ask for evidence relevant to your application, 含む:
These records allow you to assess product suitability and supplier capability using verifiable information.
はい, provided the selected model meets the table’s dimensions, axial and radial loads, tilting moment, スピード, および精度要件. Confirm the specific model’s technical limits before installation.
P2 generally represents a tighter precision class than P4 under applicable bearing precision standards. しかし, the exact tolerances depend on the relevant standard and bearing type. Request the manufacturer’s dimensional and running-accuracy specifications for direct comparison.
XCCZC Bearing states that it provides OEM services and customized bearing solutions. You can submit your required dimensions, 負荷条件, precision targets, and application details to confirm whether a suitable configuration is available.
Selecting a large diameter slewing bearing requires careful evaluation of load capacity, 剛性, 精度, 取付寸法, および動作条件. For CNC rotary tables, マシニングセンター, ロボット工学, and measurement equipment, YRT turntable bearings offer a three-row roller arrangement designed to support combined loads and precise rotary movement. By comparing model-specific specifications and working with an experienced high precision bearing manufacturer such as XCCZC Bearing, you can make a more informed decision for your equipment.
接触 XCCZCベアリング manager@xcs-bearing.com または電話 +86-15218715881 to discuss your YRT bearing requirements. Provide your target dimensions, 負荷条件, 回転速度, and precision grade to request suitable model recommendations and technical drawings.