The 6-ball layout replaces the standard seven-ball complement with fewer, larger rolling elements, reducing viscous drag and rotational inertia. Available with chrome steel or ceramic balls, ZZ 또는 2RS 씰링. The speed-focused choice for skateboards, 인라인 스케이트, 및 RC 애플리케이션.
모델: 608 6-공
보어 직경 (디): 8 mm / 0.315 ~에
외경 (디): 22 mm / 0.866 ~에
너비 (비): 7 mm / 0.276 ~에
볼 재질: 크롬강 / 세라믹 (ZrO₂ or Si₃N₄)
레이스 소재: 크롬강 (스테인레스 스틸)
정밀 등급: ABEC-7부터 ABEC-11까지 사용 가능
씰링: 2RS (고무 씰) 또는 ZZ (금속 방패)
매끄럽게 하기: 사전 기름칠 또는 건조 (오일 프리)
무게: 대략. 12 베어링당 g
그만큼 608 6-ball bearing takes the same universal 8×22×7 mm envelope and replaces the seven-ball complement with six larger-diameter balls. This is not a cost-reduction exercise. It is a deliberate speed-oriented design choice, and it changes how the bearing accelerates, rolls, and responds under load.
1. Fewer Balls, Larger Diameter, Lower Drag – With six balls instead of seven, the bearing has one fewer rolling element disturbing the lubricant film and contributing to viscous drag. The six balls are larger in diameter, maintaining raceway contact while reducing the total number of ball-to-raceway contacts per revolution. In practical skate and RC terms, this shows up as faster acceleration and a more free-feeling roll.
2. Reduced Rotational Inertia – Fewer balls mean less total mass rotating inside the bearing. Lower inertia translates into quicker spin-up: the bearing reaches speed with less input energy, which is why 6-ball designs are marketed on acceleration as much as top speed.
3. Ceramic Option Amplifies the Effect – In a ceramic 6-ball 608, the balls are both fewer and significantly lighter 강철보다. Lighter balls reduce centrifugal load on the raceways and further cut rotational inertia, allowing even faster spin and lower energy loss to maintain speed.
4. The Trade-Off: Load Distribution and Durability – The 6-ball layout is not the maximum-load configuration. With only six balls sharing the load, 그만큼 load capacity and durability margin are lower than a 7-ball bearing of the same size, even though each individual ball is larger. For a skateboard, inline skate, or RC application where speeds and acceleration matter more than static load margin, this is an acceptable—and often desirable—trade. For heavy industrial or high-shock applications, a 7-ball or full-complement design is the safer choice.
그만큼 608 6-ball bearing is built for speed-priority, low-to-moderate load applications:
스케이트보드 및 롱보드 – The original 6-ball application. The faster acceleration and higher top-speed character are directly noticeable on push and roll.
인라인 스케이트 및 롤러 스케이트 – Speed and fitness skating benefit from the reduced drag of the 6-ball layout.
RC 자동차 및 소형 모터 애플리케이션 – High-RPM, low-load bearing positions where quick spin-up matters.
피젯스피너와 요요 – The 6-ball ceramic variant has been used in spin-focused designs where ball count and low friction affect spin time.
배상...
리뷰
아직 리뷰가 없습니다..