컴팩트 샤프트 지지용 UCFL205 장착 볼 베어링

기계 공간이 제한된 경우, 옳은 것을 선택하는 것 Mounted ball bearings can directly affect installation, 조정, 유지, 장비 신뢰성. The UCFL205 flanged bearing unit gives you a compact two-bolt mounting solution for a 25 mm shaft while combining a cast iron housing with a UC205 insert bearing. For conveyors, 농업 장비, 팬, 포장 기계, 및 자재 취급 시스템, you need a bearing unit that fits the available space without creating unnecessary installation complexity. XCCZC Bearing manufactures precision bearing products and supports OEM requirements for customers across more than 20 국가.

What Are UCFL205 Mounted Ball Bearings?

The UCFL205 is a two-bolt flanged bearing unit designed to support a 25 mm shaft. Its rhombus-shaped housing provides a practical alternative when a conventional four-bolt flange or UCP pillow block cannot fit the machine structure.

The unit comes pre-assembled with a UC205 insert bearing, 이중 고무 씰, 고정나사 잠금, and a grease fitting. This configuration allows you to mount the bearing directly onto the shaft and machine frame.

UCFL205 Technical Specifications

These dimensions make the UCFL205 suitable when you need compact mounted bearings with straightforward shaft installation. 그만큼 16 mm clearance holes can accommodate M14 or 5/8-inch mounting bolts, depending on your machine design.

Key Benefits of This Self-Aligning Bearing Unit

Compact Two-Bolt Flange Design

The UCFL205 uses a two-bolt rhombus flange rather than a larger four-bolt housing. 그러므로, you can install it on compact machine frames, conveyor structures, fan assemblies, and retrofit equipment where mounting space is restricted.

Self-Aligning Bearing Performance

The UC205 insert uses a spherical outer surface that allows the bearing to accommodate minor mounting misalignment. This self-aligning bearing design can help reduce binding caused by small alignment deviations between the shaft and housing.

하지만, you should still maintain proper shaft alignment and mounting accuracy. Self-alignment does not replace correct installation practices.

Cast Iron Housing and Relubrication

The cast iron housing provides structural support for industrial applications, while the integrated grease fitting allows convenient relubrication. You can access the lubrication point without removing the complete bearing unit from the machine.

For equipment operating in dusty, 습한, or continuous-duty environments, establish a lubrication schedule based on actual operating conditions rather than relying on a fixed interval.

UCFL205 vs. Other Mounted Bearing Options

Selecting the right bearing housing depends on available space, mounting method, shaft diameter, and load requirements.

If your machine requires side mounting around a 25 mm shaft and has limited installation space, the UCFL205 provides a practical configuration.

How to Install UCFL205 Mounted Ball Bearings

Follow these basic steps when installing the unit:

1. Check the shaft: Confirm that the shaft diameter is approximately 25 mm and clean the mounting surface.
2. Position the housing: Align the two bolt holes with the machine frame and confirm sufficient clearance.
3. Install the bolts: Secure the flange using suitable M14 or 5/8-inch mounting hardware according to your equipment design.
4. Insert the shaft: Slide the shaft through the UC205 bearing bore without forcing the assembly.
5. Secure the insert bearing: Tighten the set screws evenly according to the applicable installation procedure.
6. Lubricate and inspect: Confirm grease access, shaft rotation, housing stability, and alignment before operation.

This installation sequence helps you reduce unnecessary loading during startup and makes future maintenance easier.

Applications for UCFL205 Flange Ball Bearings

You can use this flange ball bearing unit across various light- to medium-duty systems, 포함:

• Light-duty conveyor systems
• 농업 기계
• HVAC fans and blowers
• 식품 가공 장비
• 포장 기계
• Textile machinery
• 자재 취급 장비
• General industrial rotating shafts

예를 들어, a conveyor designer can use the UCFL205 where a side-mounted bearing is required but the machine frame cannot accommodate a conventional pillow block. 비슷하게, fan and blower assemblies can benefit from its compact two-bolt configuration.

Why Choose XCCZC Bearing?

심천 Xinchangsheng 베어링 유한 회사, LTD., operating as XCCZC Bearing, 에 설립되었습니다 2002 and focuses on precision bearing manufacturing. 회사는 5,000 m² modern factory with reported monthly output of approximately 3 백만 베어링.

Its manufacturing and engineering capabilities support both standard and customized bearing requirements. XCCZC Bearing reports more than 1,000 global OEM projects and serves customers in 20+ 국가.

For quality control, the company states that it performs 100% 선적 전 검사. It also provides OEM services covering bearing dimensions, 로고, 그리고 포장, while engineering and sales teams provide technical support for different application requirements.

FAQ

1. What shaft size does a UCFL205 bearing support?
The UCFL205 is designed for a 25 mm shaft and uses a UC205 insert bearing.

2. Is UCFL205 a pillow block bearing?
UCFL205 belongs to the mounted bearing family but uses a two-bolt flanged housing. It differs from a UCP pillow block because the housing mounts through a flange rather than sitting beneath the shaft.

3. Can XCCZC Bearing provide customized mounted bearings?
예. XCCZC Bearing states that it provides OEM services for customized bearing sizes, 로고, 그리고 포장. You can discuss application requirements, 치수, and production specifications with its engineering and sales teams.

결론

그만큼 Mounted ball bearings UCFL205 provides a compact two-bolt mounting configuration, 25 mm shaft compatibility, cast iron housing, UC205 insert bearing, and self-aligning capability for a range of industrial applications. 와 함께 130 mm overall length, 99 mm bolt spacing, and a weight of approximately 0.59–0.65 kg, it offers a practical solution where installation space is limited. XCCZC Bearing combines bearing manufacturing experience, OEM 지원, 100% pre-shipment inspection, 그리고 5,000 m² production facility to support different industrial bearing requirements.

CTA

If you are sourcing UCFL205 mounted ball bearings for conveyors, 팬, 농업 기계, 포장 장비, or other industrial systems, 연락하다 XCCZC 베어링 with your shaft diameter, load requirements, operating speed, mounting dimensions, and application environment. The engineering team can help you confirm the suitable bearing configuration and OEM requirements before production.