Quando lo spazio della macchina è limitato, scegliendo il giusto Mounted ball bearings can directly affect installation, allineamento, manutenzione, e affidabilità delle apparecchiature. The UCFL205 flanged bearing unit gives you a compact two-bolt mounting solution for a 25 mm shaft while combining a cast iron housing with a UC205 insert bearing. For conveyors, attrezzature agricole, tifosi, macchine per l'imballaggio, and material handling systems, you need a bearing unit that fits the available space without creating unnecessary installation complexity. XCCZC Bearing manufactures precision bearing products and supports OEM requirements for customers across more than 20 Paesi.
The UCFL205 is a two-bolt flanged bearing unit designed to support a 25 mm shaft. Its rhombus-shaped housing provides a practical alternative when a conventional four-bolt flange or UCP pillow block cannot fit the machine structure.
The unit comes pre-assembled with a UC205 insert bearing, doppie guarnizioni in gomma, bloccaggio a vite, and a grease fitting. This configuration allows you to mount the bearing directly onto the shaft and machine frame.
| Specifica | UCFL205 |
|---|---|
| Tipo di cuscinetto | Two-bolt flanged bearing unit |
| Diametro dell'albero | 25 mm / 0.984 In |
| Inserire il cuscinetto | UC205 |
| Materiale dell'alloggiamento | Ghisa, FC200 o equivalente |
| Lunghezza totale | 130 mm / 5.12 In |
| Larghezza complessiva | 35.7 mm / 1.41 In |
| Altezza totale | 68 mm / 2.68 In |
| Spaziatura dei fori dei bulloni | 99 mm / 3.90 In |
| Dimensione del foro del bullone | 16 mm |
| Peso | 0.59–0.65 kg |
| Velocità massima | Fino a 5,900 giri al minuto |
| Temperatura operativa | -40°C fino a +120°C |
These dimensions make the UCFL205 suitable when you need compact mounted bearings with straightforward shaft installation. IL 16 mm clearance holes can accommodate M14 or 5/8-inch mounting bolts, depending on your machine design.
The UCFL205 uses a two-bolt rhombus flange rather than a larger four-bolt housing. Perciò, you can install it on compact machine frames, conveyor structures, fan assemblies, and retrofit equipment where mounting space is restricted.
The UC205 insert uses a spherical outer surface that allows the bearing to accommodate minor mounting misalignment. This self-aligning bearing design can help reduce binding caused by small alignment deviations between the shaft and housing.
Tuttavia, you should still maintain proper shaft alignment and mounting accuracy. Self-alignment does not replace correct installation practices.
The cast iron housing provides structural support for industrial applications, while the integrated grease fitting allows convenient relubrication. You can access the lubrication point without removing the complete bearing unit from the machine.
For equipment operating in dusty, umido, or continuous-duty environments, establish a lubrication schedule based on actual operating conditions rather than relying on a fixed interval.
Selecting the right bearing housing depends on available space, mounting method, shaft diameter, and load requirements.
| Tipo di cuscinetto | Montaggio | Typical Advantage | Suitable Use |
|---|---|---|---|
| UCFL205 | Two-bolt flange | Compact side mounting | Trasportatori, tifosi, attrezzature agricole |
| UCP Bearing | Two-bolt pillow block | Simple horizontal shaft support | Conveyor shafts, machinery frames |
| Four-bolt flange | Four-bolt flange | Larger mounting footprint | Heavier structural applications |
| Insert bearing | Shaft-mounted | Flexible housing selection | Custom machinery assemblies |
If your machine requires side mounting around a 25 mm shaft and has limited installation space, the UCFL205 provides a practical configuration.
Follow these basic steps when installing the unit:
This installation sequence helps you reduce unnecessary loading during startup and makes future maintenance easier.
You can use this flange ball bearing unit across various light- to medium-duty systems, compreso:
Per esempio, a conveyor designer can use the UCFL205 where a side-mounted bearing is required but the machine frame cannot accommodate a conventional pillow block. Allo stesso modo, fan and blower assemblies can benefit from its compact two-bolt configuration.
Shenzhen Xinchangsheng cuscinetto Co., LTD., operating as XCCZC Bearing, è stata fondata nel 2002 and focuses on precision bearing manufacturing. L'azienda gestisce a 5,000 m² modern factory with reported monthly output of approximately 3 milioni di cuscinetti.
Its manufacturing and engineering capabilities support both standard and customized bearing requirements. XCCZC Bearing reports more than 1,000 global OEM projects and serves customers in 20+ Paesi.
For quality control, the company states that it performs 100% ispezione prima della spedizione. It also provides OEM services covering bearing dimensions, loghi, e imballaggio, while engineering and sales teams provide technical support for different application requirements.
1. What shaft size does a UCFL205 bearing support?
The UCFL205 is designed for a 25 mm shaft and uses a UC205 insert bearing.
2. Is UCFL205 a pillow block bearing?
UCFL205 belongs to the mounted bearing family but uses a two-bolt flanged housing. It differs from a UCP pillow block because the housing mounts through a flange rather than sitting beneath the shaft.
3. Can XCCZC Bearing provide customized mounted bearings?
SÌ. XCCZC Bearing states that it provides OEM services for customized bearing sizes, loghi, e imballaggio. You can discuss application requirements, dimensioni, and production specifications with its engineering and sales teams.
IL Mounted ball bearings UCFL205 provides a compact two-bolt mounting configuration, 25 mm shaft compatibility, cast iron housing, UC205 insert bearing, and self-aligning capability for a range of industrial applications. Con 130 mm overall length, 99 mm bolt spacing, and a weight of approximately 0.59–0.65 kg, it offers a practical solution where installation space is limited. XCCZC Bearing combines bearing manufacturing experience, OEM support, 100% pre-shipment inspection, e un 5,000 m² production facility to support different industrial bearing requirements.
If you are sourcing UCFL205 mounted ball bearings for conveyors, tifosi, macchine agricole, attrezzature per l'imballaggio, or other industrial systems, contatto Cuscinetto XCCZC with your shaft diameter, load requirements, operating speed, mounting dimensions, and application environment. The engineering team can help you confirm the suitable bearing configuration and OEM requirements before production.
25ottobre
di XCCZC
01aprile
di XCCZC
