CF6 Rod End – 3/8″ Bore × 3/8-24 UNF Right-Hand Thread, 2-Piece Metal-to-Metal Spherical Plain Bearing, Zinc-Plated Carbon Steel Body + 52100 Hard-Chrome Ball, for Hydraulic Cylinders, Steering Linkages, CNC & 産業オートメーション.
モデル: CF6
穴径 (B): 0.3750 で (9.525 mm)
ねじサイズ (N): 3/8-24 UNF-2B(right-hand standard;CFL6 for left-hand)
外径 (D): 1.0000 in(25.40 mm)
ボール幅 (W): 0.500 in(12.70 mm)
ハウジングの幅 (T): 0.359 in(9.12 mm)
Center Line Length (あ): 1.625 in(41.28 mm)
材料: クロム鋼
重さ: ≈0.059 kg(0.13 lb)
の CF6 is an inch-size female rod end bearing built on the classic two-piece metal-to-metal 工事: ある zinc-plated low-carbon steel body swaged around a 52100 bearing steel ball, heat-treated to Rc 56 minimum and hard-chrome plated. と 3/8″ ボア, 3/8-24 UNF right-hand internal thread, そして 22.6 kN static radial load capacity, it is the articulation joint specified when a linkage must accommodate misalignment while carrying load in tension or compression — without the cost and maintenance of a precision aerospace rod end.
22.6 kN Static Radial Load – Medium-Duty Capacity in a 3/8″ ボア | The CF6 carries 5,100 ポンド (≈22.6 kN) ultimate static radial load — a load class that covers hydraulic cylinder rod ends, steering and suspension links, and machinery control rods. In the CF inch series, the CF6 is the mid-range workhorse, strong enough for real industrial duty while remaining compact enough for tight linkage stacks.
Two-Piece Metal-to-Metal Construction – Proven, 単純, Serviceable | の low-carbon steel body is swaged around the 52100 hard-chrome ball, creating a direct metal-to-metal sliding interface with no liner to delaminate or wear through. This construction is 単純, cost-effective, and field-proven — the reason the CF series has remained the volume standard for general industrial rod ends. It requires periodic greasing, but it is forgiving of contamination and overload in a way that lined bearings are not.
22° Misalignment – Absorbs Linkage Geometry and Installation Error | The spherical plain design accommodates 22° of angular misalignment, absorbing シャフトのたわみ, mounting tolerance, and linkage articulation without binding or edge-loading the ball. This is the functional reason rod ends replace rigid clevis joints in steering, サスペンション, and actuator linkages.
Female Thread – Compact in Tight Linkage Stacks | の 3/8-24 UNF internal thread allows direct connection to male-threaded clevis pins, control rods, and cylinder ends, often eliminating the need for separate adapters or threaded studs. で compact linkages and cylinder rod ends, the female configuration shortens the overall joint stack and simplifies assembly.
Right-Hand and Left-Hand Thread – Adjustable Turnbuckle Configurations | CF6 is right-hand thread;CFL6 is the left-hand variant. Using an RH rod end at one end of a link and an LH rod end at the other allows length adjustment by rotating the link — the standard method for tensioning steering linkages, setting suspension geometry, and aligning control rods.
送信中...
レビュー
まだレビューはありません.