CF6 Rod End – 3/8″ Bore × 3/8-24 UNF Right-Hand Thread, 2-Piece Metal-to-Metal Spherical Plain Bearing, Zinc-Plated Carbon Steel Body + 52100 Hard-Chrome Ball, for Hydraulic Cylinders, Steering Linkages, CNC & Industrielle Automatisierung.
Modell: CF6
Bohrungsdurchmesser (B): 0.3750 In (9.525 mm)
Gewindegröße (N): 3/8-24 UNF-2B(right-hand standard;CFL6 for left-hand)
Außendurchmesser (D): 1.0000 in(25.40 mm)
Ballbreite (W): 0.500 in(12.70 mm)
Gehäusebreite (T): 0.359 in(9.12 mm)
Center Line Length (A): 1.625 in(41.28 mm)
Material: Chromstahl
Gewicht: ≈0.059 kg(0.13 lb)
Der CF6 is an inch-size female rod end bearing built on the classic two-piece metal-to-metal Konstruktion: A zinc-plated low-carbon steel body swaged around a 52100 bearing steel ball, heat-treated to Rc 56 minimum and hard-chrome plated. Mit einem 3/8″ langweilig, 3/8-24 UNF right-hand internal thread, Und 22.6 kN static radial load capacity, it is the articulation joint specified when a linkage must accommodate misalignment while carrying load in tension or compression — without the cost and maintenance of a precision aerospace rod end.
22.6 kN Static Radial Load – Medium-Duty Capacity in a 3/8″ Langweilig | The CF6 carries 5,100 lbf (≈22.6 kN) ultimate static radial load — a load class that covers hydraulic cylinder rod ends, steering and suspension links, and machinery control rods. In the CF inch series, the CF6 is the mid-range workhorse, strong enough for real industrial duty while remaining compact enough for tight linkage stacks.
Two-Piece Metal-to-Metal Construction – Proven, Einfach, Serviceable | Der low-carbon steel body is swaged around the 52100 hard-chrome ball, creating a direct metal-to-metal sliding interface with no liner to delaminate or wear through. This construction is einfach, cost-effective, and field-proven — the reason the CF series has remained the volume standard for general industrial rod ends. It requires periodic greasing, but it is forgiving of contamination and overload in a way that lined bearings are not.
22° Misalignment – Absorbs Linkage Geometry and Installation Error | The spherical plain design accommodates 22° of angular misalignment, absorbing Wellendurchbiegung, mounting tolerance, and linkage articulation without binding or edge-loading the ball. This is the functional reason rod ends replace rigid clevis joints in steering, Suspension, and actuator linkages.
Female Thread – Compact in Tight Linkage Stacks | Der 3/8-24 UNF internal thread allows direct connection to male-threaded clevis pins, control rods, and cylinder ends, often eliminating the need for separate adapters or threaded studs. In compact linkages and cylinder rod ends, the female configuration shortens the overall joint stack and simplifies assembly.
Right-Hand and Left-Hand Thread – Adjustable Turnbuckle Configurations | CF6 is right-hand thread;CFL6 is the left-hand variant. Using an RH rod end at one end of a link and an LH rod end at the other allows length adjustment by rotating the link — the standard method for tensioning steering linkages, setting suspension geometry, and aligning control rods.
Senden...
Rezensionen
Es liegen noch keine Bewertungen vor.