SFR144TLKIN Dental Handpiece Bearing – Stainless steel flanged bearing with ceramic balls and a Torlon cage. Rated to 400,000 RPM with a service life of six months or more under normal clinical use. The stepped flange provides positive axial location in KaVo, Midwest, and compatible high-speed turbine handpieces. A direct drop-in replacement for worn or noisy turbine bearings.
Key Specifications:
| Model | SFR144TLKIN (flanged, stepped outer ring) |
| Bearing Type | Angular contact ball bearing, miniature, dental turbine grade |
| Bore Diameter (d) | 3.175 mm / 0.125 in |
| Outer Diameter (D) | 6.35 mm / 0.250 in |
| Width (B) | 2.38 mm / 0.0937 in |
| Flange Outer Diameter (Df) | 7.518 mm / 0.296 in |
| Flange Width (Bf) | 0.787 mm / 0.031 in |
| Dynamic Load Rating (Cr) | 54 N |
| Static Load Rating (C₀r) | 17 N |
| Speed Rating | 400,000 RPM |
| Precision Class | ABEC-7 / ISO P4 (runout typically <0.0025 mm) |
| Ball Material | Grade 3 Silicon Nitride (Si₃N₄) ceramic |
| Cage Material | Torlon (polyamide-imide) |
| Ring Material | Refined stainless steel, vacuum heat-treated and cryogenically treated |
| Weight | Approx. 0.48 g |
SFR144TLKIN Dental Handpiece Bearing – Stainless steel flanged bearing with ceramic balls and a Torlon cage. Rated to 400,000 RPM with a service life of six months or more under normal clinical use. The stepped flange provides positive axial location in KaVo, Midwest, and compatible high-speed turbine handpieces. A direct drop-in replacement for worn or noisy turbine bearings.
1. Secure Fit in Demanding Handpieces – The flange-and-step design provides axial and radial location that simple unflanged bearings cannot match. This is especially important in high-speed turbines where any bearing migration would upset rotor balance.
2. Extended Service Life Under Sterilization – Ceramic balls, a Torlon cage, and vacuum-treated stainless rings work together to resist the combined effects of high speed, heat, moisture, and repeated autoclave cycles. Under normal clinical use, service life of six months or more is achievable.
3. Lower Noise and Vibration – The low mass of ceramic balls and the precision of ABEC-7 manufacturing reduce vibration and audible noise, contributing to a more comfortable experience for both clinician and patient.
4. Direct Replacement for Worn Bearings – The SFR144TLKIN is dimensionally compatible with the SFR144TL flange series and is used in KaVo, Midwest, Star, and Bien-Air handpiece platforms, among others. Verify the bearing marking or handpiece model before ordering.
High-speed dental turbine handpieces – the primary application, including KaVo and Midwest platforms and other compatible cartridges.
Dental laboratory micromotors – high-speed grinding and polishing handpieces.
Precision miniature spindle assemblies – where a flanged, stepped miniature bearing is required for axial location.
Sending...
Reviews
There are no reviews yet.