Product Overview

A headset bearing is one of the most overlooked components on a bicycle—until it fails. Once a bearing develops indexing, roughness, or play, every steering input feels vague, and the front end loses the precision the frame was designed to deliver. The MR137 bike headset bearing is the exact replacement for a very common integrated headset size, bringing back smooth, predictable steering without guesswork or modification.

Key Features:

  • Handles combined radial and axial loads
    Steering loads are not purely radial. Cornering, braking, and impacts push the fork and head tube in multiple directions at once. Angular contact bearings place their raceways at an angle to the axis, allowing them to support both radial and axial forces simultaneously—something a standard deep groove bearing does less effectively in a headset application. The 45°/45° chamfer also matches the angled seats machined into integrated head tubes, so the bearing sits flush and transfers load evenly across the full raceway.

  • Long Service Life
    Quality angular contact headset bearings are designed so all balls engage evenly, spreading force over a larger surface area to minimize wear and maximize service life. This is what separates a bearing that lasts a few seasons from one that develops indexing after a few wet rides.

  • Sealed against sweat, rain, and washdown.
    Headset bearings live in one of the harshest locations on a bike: directly behind the front wheel, exposed to road spray, mud, sweat dripping from the rider, and hose-down cleaning. The MR137 uses dual-lip seals riding in a micro-groove (labyrinth) and is filled with high-pressure waterproof grease to keep water and contaminants out of the raceway. This sealing is the difference between a bearing that stays smooth through a wet season and one that grinds itself apart.

  • Stainless steel option for wet climates and high-sweat riders
    Standard chrome steel MR137 bearings perform well in dry, fair-weather conditions. For riders in persistent rain, coastal environments, or high-sweat situations, the 440C stainless steel variant offers superior corrosion resistance while retaining high hardness and wear resistance. Enduro notes that stainless is slightly softer than 52100 chrome steel but is an excellent alternative where moisture is unavoidable.

Applications

The MR137 is a direct replacement bearing for:

  • Giant OD2 road and MTB headsets – commonly used as the lower bearing in OverDrive 2 systems

  • 1-1/4″ integrated headsets – including FSA No.54 and compatible models

  • 1-3/8″ integrated headsets – where the 37 × 46.9 × 7 mm 45/45 specification applies

  • Any headset requiring a 37 mm ID / 46.9 mm OD / 7 mm 45°/45° cartridge

Always verify the size and angle marking on your existing bearing, or consult your frame or headset manufacturer’s specification, before ordering.

bicycle headset bearing
bicycle bearing
MR137 bearing

Reviews

There are no reviews yet.

Be the first to review “MR137 37 × 46.9 × 7 mm Thin Walled 45°/45° Angular Contact Bike Headset Bearing”

Your email address will not be published. Required fields are marked