608CE 8x22x7mm Zirconia Full Ceramic...
方面: 8mm inner diameter × 22mm outer diameter × 7mm width
Ring & 球材质: Zirconia (ZrO?): High fracture toughness, excellent wear resistance, ideal for moderate to high loads
Density: Approximately 40–60% lighter than steel, reducing centrifugal force and allowing higher rotational speeds
Corrosion Resistance: Inert to most acids, alkalis, salt water, and solvents – will never rust
Electrical Properties: Non-conductive (excellent electrical insulation), 无磁性
阅读更多
Corrosion Resistant Silicon Nitride ...
Full Ceramic Deep Groove Ball Bearing – Non?magnetic, 电绝缘, corrosion resistant, operable up to 1200°C. Self?lubricating, runs dry without oil or grease. Ideal for semiconductor, 航天, 医疗的, 化学加工, vacuum systems, and high?temperature furnace applications where steel bearings inevitably fail.
We offer Si3N4 full ceramic deep groove ball bearings in a wide range of standard sizes, including miniature series (down to 2mm ID), metric and inch dimensions, and large?diameter configurations. Custom retainer materials (窥视, 聚四氟乙烯, PA66, full complement without cage) are available.
阅读更多
高温 609 2RS Full Cerami...
方面: 孔径: 9 毫米, 外径: 24 毫米, 宽度: 7 毫米.
全材料: 氮化硅 (氮化硅) 对于所有组件.
密封件: PEEK cage
Operating Temperature: 可承受 -60°C 至 800°C 以上的连续运行，不会降低性能或失去预载.
额定负载: 虽然材质优良, 请注意，陶瓷的额定载荷低于钢. 动态负载 (铬): 〜1.8 kN, 静载荷 (科尔): ~0.9 kN. 其优越性在于其耐环境性, 非纯负载能力.
阅读更多
MR74 4x7x2.5mm Zro2 Full Ceramic Min...
MR74 Full Ceramic Ball Bearing – Ultra-lightweight, 高速, fully non-magnetic, 电绝缘. Zero lubrication required, zero rust.
模型: MR74 (全陶瓷)
轴承类型: Deep Groove, Single Row
Inner Diameter (d): 4 mm
Outer Diameter (D): 7 mm
Width (乙): 2.5 mm
Ring Material: Zirconium (Zro2)
球材质: Zirconium (Zro2)
保持架材质: 聚四氟乙烯 / PEEK
Seal Options: 2RS / 打开
阅读更多