HGH20CA 선형 가이드 베어링 슬라이더 ...
Component features:
High Square type model (HGH)
Heavy Load model (CA)
Standard we have Z0 Pre Tension, perfect for CNC-Routers
High Precision Class (H)
4 x Threaded hole in carriage allows mounting from above
Mounting from below not possible (we advise to use HGW model then)
Model Type: HGH20 (Flange Type / Standard Length Block)
Rail Size: 20mm width
Block Dimensions: Low-profile, high-strength flange design for easy mounting from the top.
재료: High-quality GCr15 bearing steel, fully heat-treated for maximum hardness (HRC 58-62) and wear resistance.
Load Capacity: Features a 4-way equal load design, capable of absorbing radial, reverse radial, and lateral loads simultaneously. It offers exceptional static and dynamic moment ratings suitable for cantilevered applications.
Accuracy Class: Available in N (정상), H (High), and P (정도) grades to suit varying OEM requirements.
Length (L): 58 mm (Standard length, variations may exist)
정격 부하: Engineered to handle both dynamic and static loads. Specific radial load capacity depends on the configuration and mounting but is suitable for a wide range of industrial automation tasks. Exact values are available in our technical datasheet.
더 읽어보세요
LM 시리즈 선형 가이드 볼 베어링 ...
These linear bearings are specifically engineered for applications requiring high precision and reliability. The LM3UU and LM6UU models are ideal for desktop 3D printers and small CNC machines, while the LM8UU, LM10UU, and LM12UU models are designed for industrial-grade 3D printers, CNC routers, and automated manufacturing equipment. All models feature excellent compatibility with standard linear shafts and mounting configurations, making them easy to integrate into existing systems.
기술 사양:
모델: LM8UU
Size:8 × 15 × 24 mm
Material: 크롬강 (GCR15)
Hardness: 58-62 HRC (Raceways)
Precision Grade: ABEC-3 Standard
Operating Temperature: -30°C to +120°C
Load Capacity:Dynamic 0.8kN, Static 1.6kN
Clearance: Standard C3 (Greater than Normal)
더 읽어보세요
LMES20UU Super Linear Ball Bearings ...
Super Linear Ball Bearing – Ultra?Low Friction, Self?Aligning, High?Speed Linear Motion. Features advanced technology or engineered?polymer retainers for reduced noise and long?term maintenance?free operation. Available in closed, open, adjustable, and corrosion?resistant configurations. The ideal upgrade for industrial automation, CNC machines, robotics, medical devices, packaging equipment, and semiconductor manufacturing.
모델: LMES20UU
Type: Sealed, closed type, self-aligning linear ball bushing (Super Series)
Shaft Diameter (dr): 20 mm
Outer Diameter (D1): 32 mm
Overall Length (L ±0.2): 45 mm
Weight: 61 g
Seal Type: Double rubber lipped seals (양쪽)
Ball Material: Chrome steel
더 읽어보세요
LMF8UU Round Flange Linear Motion Ba...
LMF8UU 선형 볼 베어링 - 먼지를 차단하고 윤활을 유지하기 위해 이중 밀봉 설계의 강화 베어링 강철로 제작됨. 쉬운 설치를 위한 플랜지 마운트. 3D 프린터에 이상적, CNC, 및 자동화 슬라이드. 매끄러운, 저마찰, 오래 지속되는.
기술 사양:
Model LMF8UU
Inner Diameter (ID) 8 mm / 0.31 in
Outer Diameter (의) 15 mm / 0.59 in
Total Length 24 mm / 0.94 in
Flange (베이스) 지름 32 mm / 1.26 in
Accuracy Grade ABEC3
Material High-carbon bearing steel
Seal Type Double-sealed (양쪽)
더 읽어보세요
저소음 25×40×59mm 이중밀폐형 ...
The LM25UU is a standard metric linear ball bearing, designed for smooth and precise linear motion along a 25mm diameter shaft. Perfect for CNC routers, 3D printers, packaging equipment, and factory automation.
기술 사양:
LM: Stands for Linear Motion.
25: Indicates the inner diameter (구경) of 25 mm, designed to fit a standard 25mm diameter supported shaft or rail.
UU: Denotes the sealing configuration, featuring rubber seals on both ends to protect the internal ball circuits from dust and debris.
Key Dimensions:
내경 (디): 25 mm
Outer Diameter (디): 32 mm
Length (L): 58 mm (Standard length, variations may exist)
정격 부하: Engineered to handle both dynamic and static loads. Specific radial load capacity depends on the configuration and mounting but is suitable for a wide range of industrial automation tasks. Exact values are available in our technical datasheet.
더 읽어보세요
SBR20UU 슬라이드 블록 선형 가이드 Ra...
SBR Series Linear Rail Guide – Easy mounting, high rigidity, 낮은 마찰. 3D 프린터에 이상적, CNC routers, automation slides, and packaging machinery.
모델： SBR20
Shaft Diameter：20 mm
Rail Material：Aluminum alloy + GCr15
Shaft Surface： Chrome plated (ground finish)
Standard Lengths：800mm
Bearing Block Model:SBR20U
Block Material:Chrome steel
더 읽어보세요