アベック 7 ハイブリッド セラミック SMR623C 3X10X4...
Key Specifications:
Model: SMR623C
Dimensions: 3x10x4mm
Balls: Silicon Nitride (Si3N4) Ceramic
Races: 440C Stainless Steel (hardened to 58-60 HRC)
Tolerance: ABEC-7 (ISO P2 equivalent)
Seals: Dual Rubber Shields (RS)
Max RPM: 50,000+ (dry), 35,000+ (lubricated)
アプリケーション: High-end spinning reels, baitcasters, conventional reels, tournament fishing
Zero Corrosion: Ceramic balls immune to rust and saltwater degradation.
Lighter Spool: 30% reduction in startup inertia for longer casts.
Low Maintenance: Self-lubricating design eliminates grease washout.
Enhanced Sensitivity: Smooth operation improves lure action and bite detection.
続きを読む
自転車ホイールハブヘッドセット薄肉 ...
Key Technical Parameters:
• Series: Standard 45° Angular Contact design (e.g., 41 Series, 42 Series)
• Dimensions: Comprehensive range covering common standards (e.g., 1", 1-1/8", 1.5" steerer tubes). Specific ID/OD/Width available per model.
• Material: Standard: クロム鋼 (SAE 52100); Premium: Martensitic Stainless Steel (AISI 440C).
• Ball Material: Grade 10 Chrome Steel or Si3N4 Ceramic (upgrade option).
• Cage: Reinforced Nylon 66 or precision-stamped steel cage for stability.
• Seals: Dual-purpose low-friction rubber seals or metal shields.
• Pre-Lubrication: High-performance, waterproof lithium-based grease.
続きを読む
カスタムロゴ 608 ゴールドチタンスケートボード...
寸法: Standard 608 size (8mm Bore, 22mm Outer Diameter, 7mm Width).
Load Ratings: 動定格荷重 (Cr): 12 kN | 静定格荷重 (Cor): 6.65 kN.
Speed: Engineered for high RPMs, allowing for incredible acceleration and sustained coasting speed that steel bearings cannot match.
Weight: Up to 30% lighter than all-steel bearings, reducing rotational mass for quicker wheel response and a more agile board feel.
耐久性: The combination of materials makes these bearings virtually impervious to rust, corrosion, and wear from dirt and moisture. They perform consistently in wet or dry conditions.
Maintenance: Requires less frequent cleaning and lubrication than standard bearings. The included high-speed lubricant is optimized for the ceramic-steel interface.
続きを読む
Customized 608 Colorful Skateboard H...
寸法: 8mm inner diameter × 22mm outer diameter × 7mm width
Ball Material: Silicon nitride (Si3N4) ceramic balls - lighter, harder, and smoother than steel balls
Races & Rings: High-precision chrome steel (GCr15), precision?ground for consistent tolerances
Surface Finish: Black oxide coating - provides enhanced corrosion resistance and a distinctive professional appearance
Cage: High-strength nylon or steel retainer (depending on variant) for stable ball spacing and reduced friction
Shields: Double-sealed or removable rubber shields to block dust, debris, and moisture while allowing easy cleaning
Precision Rating: ABEC-7 / ABEC-9 / ABEC-11 grade options available for smooth rolling and consistent performance
続きを読む
High-Speed 400 000 rpm Low-Noise Sta...
Our premium dental handpiece bearings are engineered to meet the extreme demands of modern dentistry. Designed for high-speed operation, exceptional quietness, and extended service life.
Key Specifications:
Model: SR144
Dimensions: 3.175x6.35x2.38 mm
Balls: Silicon Nitride (Si3N4) Ceramic
Races: 440C Stainless Steel (hardened to 58-60 HRC)
Tolerance: ABEC-7 (ISO P2 equivalent)
Seals: Dual Rubber Shields (RS) or Metal Seals
RPM: 400,000
Ceramic balls are standard in our high-end series for their lightweight properties, which reduce centrifugal force, lower heat generation, and enable higher maximum speeds.
続きを読む
SMR105 5X10X4 mm 2RS Hybrid Ceramic ...
The SMR105 hybrid ceramic bearing features precision stainless steel rings and silicon nitride (Si3N4) ceramic balls, specifically designed for baitcasting and spinning reels. They offer performance advantages that meet the demands of serious anglers. Cast further, retrieve more smoothly, and have greater confidence in fishing.
技術仕様 & Design Features
Dimensions: 5mm inner diameter × 10mm outer diameter × 4mm width
Ball Material: Silicon nitride (Si3N4) ceramic – lightweight, ultra-hard, and virtually frictionless
Race Material: High-grade stainless steel – precision-ground for smooth rotation and dimensional accuracy
Cage (Retainer): High-strength nylon or stainless steel – optimized for low friction and consistent ball spacing
Shields: Double metal shields (ZZ) or rubber seals (2RS) – prevent debris ingress while allowing easy cleaning and re-lubrication
Precision Rating: ABEC-5 or ABEC-7 grade – ensures smooth rolling and minimal vibration during high-speed retrieves
続きを読む