SMR117 7x11x3mm Stainless Steel Hybr...
SMR117 Stainless Steel Bearing – Stainless steel races with silicon nitride ceramic balls. Delivers up to 15-21% casting distance gains, 50% faster spin than standard steel bearings. Pre-lubricated, sealed, corrosion resistant. The ultimate upgrade for Shimano, Daiwa, Abu Garcia, Penn, Okuma, and Lews fishing reels.
Specifiche tecniche & Design Features
Model: SMR117 (Hybrid Ceramic)
Diametro interno (D): 7 mm / 0.276 in
Outer Diameter (D): 11 mm / 0.433 in
Width (B): 3 mm / 0.118 In (2.5 mm variant also available)
Ring Material: AISI 440C Stainless Steel
Ball Material: Si3N4 Silicon Nitride Ceramic (Grade 5)
Grade / Precisione: ABEC-5 / ABEC-7 (depending on variant)
Limitare la velocità (Grease): 45,000–50,000 RPM
Corrosion Protection Excellent – AISI 440C + ceramic balls (fully non-rusting)
Maintenance Pre-lubricated, low maintenance
Per saperne di più
TCM FD 20 -30T3 Forklift Mast Side R...
Forklift Mast Side Roller Bearing – Sealed construction, shock-resistant, special heat treatment for deep hardened layer.Ideal for forklift mast assemblies, lift trucks, aerial work platforms, and industrial material handling equipment where precise vertical travel and abrasive resistance are required under heavy loads.
Per saperne di più
Thin Section Non-magnetic 6805 2RS P...
IL 6805 plastic deep groove ball bearing is made of high-performance engineering polymers such as POM or PEEK, featuring complete rust resistance and excellent chemical resistance. It is lightweight, electrically insulating, capable of operating dry or with minimal lubrication, and is an ideal choice for food processing, chemical treatment, medical equipment and humid environments.
Product Specifications & Design Details
Bearing Type: Single-row, deep groove ball bearing, designed to radial and light axial loads.
Dimensioni (Metric Standard):
Diametro del foro (D): 25 mm
Outer Diameter (D): 37 mm
Width (B): 7 mm
Per saperne di più
UCF208 40mm Bore Cast Iron Housing F...
UCF208 Pillow Block Bearing Unit – 4-Bolt Flange Mount, 40mmAlesaggio, Cast Iron Housing. Pre-lubricated, double-sealed, self-aligning.Easy drop-in replacement for industrial conveyors, agricultural machinery, fans, and pumps. Maintenance-friendly and corrosion-resistant.
Bearing Model: UCF208
Type: 4?bolt flange mounted bearing unit (pillow block style with flange)
Diametro del foro (D): 40 mm / 1.5748 in
Housing Material: High?grade cast iron
Insert Bearing Model: UC208 (deep groove ball bearing with extended inner ring)
Insert Bearing Material: Chrome steel (GCr15) – bearing rings and balls
Seals: Double rubber seals (2RS) on both sides of the insert bearing
Bolt Hole Size: 4 holes, each 16 mm diameter for M14 bolts
Weight: Approx. 2.8 – 3.2 kg per unit
Per saperne di più
UCFL205 Flanged Bearing Unit Cast Ir...
UCFL205 Two-Bolt Flanged Bearing Unit – 25mm Shaft, Cast Iron Housing, Self-Aligning. Pre-assembled with UC205 insert bearing, double rubber seals, set screw locking, and grease fitting. Factory pre-lubricated, ready to mount.
Modello: UCFL205
Shaft Diameter (D): 25 mm / 0.984 in
Overall Length (a): 130 mm / 5.12 in
Overall Width (z): 35.7 mm / 1.41 in
Overall Height (H): 68 mm / 2.68 in
Bolt Hole Spacing (J): 99 mm / 3.90 in
Bolt Hole Size (N): 16 mm (clearance for M14 or 5/8″ bolts)
Peso: 0.59 – 0.65 kg
Housing Material: Cast iron (FC200 or equivalent)
Insert Bearing: UC205 (single?row radial ball bearing, extended inner ring)
Per saperne di più
UCP205 206 207 Cuscinetto del blocchetto di cuscino ...
Exceptional strength and durability - The UCP205 bearing with housing can extend service life in harsh environments and is suitable for applications such as conveyors, agricultural machinery, and material handling equipment.
Bearing Insert: UC205 (Standard 2-Bolt Flange)
Shaft Size (Diametro del foro): 25 mm (0.9843")
Housing Material: High-Grade Cast Iron
Bearing Material: Hardened Chrome Steel
Seals: Triple-Lip Contact Seal (Buna-N/Nitrile Rubber) on both sides for superior protection against dirt, dust, and moisture.
Lubrificazione: Pre-lubricated with high-quality lithium-based grease. Features a standard grease fitting (zerk fitting) for easy re-lubrication without disassembly.
Mounting: Two mounting holes for M10 fasteners, with a centered slot for easy adjustment and alignment.
Load Capacity: Designed to handle moderate to heavy radial loads.
Per saperne di più
YRT50 YRT80 YRT100 P4 YRT Series Tur...
YRT Series Rotary Table Bearing-Integrated mounting holes, extremely high rigidity & low runout. Ideal for CNC rotary tables, machining centers, medical imaging, and robotics. Supports axial, radial, and tilting moment loads.
Series: YRT (metric, high-precision)
Diametro interno (D): 50 mm – 850 mm (common: 80, 100, 120, 150, 200, 260, 325, 395, 460, 580, 650, 850)
Diametro esterno (D): 80 mm – 1090 mm
Height (H): 20 mm – 96 mm (depending on size)
Radial Load Rating (Cr): Moderate to high – supports combined loads
Tilting Moment Rigidity: Excellent – very high stiffness against moment loads
Precision Grades: P4, P2 (ISO); often SP, UP (ultra-precision)
Materiale: Bearing steel (GCr15) or case-hardened steel
Lubrication: Grease pre-filled; special lubrication holes available
Mounting: Through holes on inner and outer rings (no separate flange needed)
Per saperne di più