When you need standard deep groove ball bearings for an electric motor, motocicleta, bomba, o maquina industrial, the wrong size or unsuitable load rating can lead to vibration, desgaste prematuro, y tiempo de inactividad inesperado. El 6205 deep groove ball bearing provides a standardized 25 × 52 × 15 mm configuration, making it a practical choice for equipment that requires reliable radial load support and smooth rotation.
Shenzhen Xinchangsheng teniendo Co., LIMITADO. (Rodamiento XCCZC) se ha especializado en la fabricación de rodamientos de precisión desde 2002. con un 5,000 m² fábrica moderna, producción mensual de aproximadamente 3 millones de rodamientos, and more than 1,000 proyectos OEM globales, XCCZC supplies bearing solutions for industrial customers worldwide.
El 6205 is a widely used single-row deep groove ball bearing. Its standardized dimensions make replacement and equipment integration straightforward when your shaft and housing are designed for this specification.
| Especificación | 6205 Bearing Details |
|---|---|
| Modelo de rodamiento | 6205 |
| Tipo de rodamiento | Rodamiento rígido de bolas |
| Diámetro interior (d) | 25 milímetros / 0.984 en |
| Diámetro exterior (D) | 52 milímetros / 2.047 en |
| Ancho (B) | 15 milímetros / 0.591 en |
| Material | Acero para rodamientos de cromo con alto contenido de carbono, GCr15 |
| Clasificación de carga dinámica | Aproximadamente 14 kN |
| Clasificación de carga estática | Aproximadamente 7.8 kN |
| Limitar la velocidad | Approximately 8,000–12,000 RPM, application dependent |
| Jaula | Riveted steel cage or polyamide, dependiendo de la variante |
The exact speed capability depends on factors such as sealing configuration, lubricación, operating temperature, carga, y condiciones de instalación. Por lo tanto, you should confirm the required variant with XCCZC before placing an order.
If your equipment already uses a 6205 cojinete, el 25 mm de diámetro, 52 mm outside diameter, y 15 mm width provide a clear dimensional reference for replacement sourcing.
You can compare the existing shaft and housing dimensions against the bearing specification before ordering. This helps reduce installation problems caused by selecting an incorrect bearing size.
The bearing uses high-carbon chromium bearing steel, commonly identified as GCr15, for the bearing rings and rolling components. This material is suitable for applications where you need a combination of hardness, resistencia al desgaste, and stable rolling performance.
For demanding machinery, you should still select the bearing configuration according to actual load, velocidad, temperatura, lubricación, y entorno operativo.
With an indicative grease-lubricated limiting speed of approximately 8,000–12,000 RPM, el 6205 can serve many rotating applications.
Por ejemplo, you may encounter this bearing specification in:
The actual operating speed should always be evaluated against the complete bearing configuration and application conditions.
Choosing the correct bearing type matters because different designs address different load and motion requirements.
| Tipo de rodamiento | Fuerza típica | Common Application |
|---|---|---|
| 6205 Rodamiento rígido de bolas | Cargas radiales + limited bidirectional axial loads | motores, zapatillas, maquinaria |
| Rodamiento de bolas de contacto angular | Combined radial and axial loads | Husillos, precision machinery |
| Rodamiento de rodillos cónicos | Higher combined load capability | Automotive and heavy machinery |
| Rodamiento de rodillos cilíndricos | High radial load capacity | Equipos industriales |
| Rodamiento de bolas de empuje | Primarily axial loads | Axial-load applications |
If your equipment primarily requires radial load support and uses the 6205 mounting dimensions, a standard deep groove configuration can be a practical starting point.
Before purchasing a 6205 bearing 25x52x15mm, follow these steps:
When you source chrome steel deep groove ball bearings for production or replacement, supplier capability is as important as the bearing specification.
Shenzhen Xinchangsheng teniendo Co., LIMITADO. was established in 2002 and has more than two decades of bearing engineering and manufacturing experience. Its current factory covers approximately 5,000 m², with reported monthly production of around 3 millones de rodamientos.
XCCZC also reports:
The company states that its products meet international standards and are exported to Europe, Sudeste Asiático, y las américas. For certification requirements, you should request the applicable certificate and inspection documentation for your specific order rather than relying on a generic certification claim.
Un estándar 6205 el rodamiento tiene un 25 mm de diámetro interior, 52 mm de diámetro exterior, y 15 mm de ancho. You should verify these dimensions against your shaft and housing before replacement.
Sí. El 6205 configuration is commonly used in rotating machinery, including electric motors, fans, compresores, y bombas, provided that the bearing load, velocidad, lubricación, and mounting conditions are suitable.
XCCZC provides OEM services covering customized bearing sizes, logotipos, y embalaje. If you require a specific seal, cage, autorización, lubricación, or other configuration, contact the engineering team to confirm availability before ordering.
For equipment that requires standard deep groove ball bearings, el 6205 25 × 52 × 15 mm bearing offers a practical combination of standardized dimensions, Construcción de acero cromado GCr15., radial load capability, and high-speed suitability. Whether you are sourcing bearings for electric motors, zapatillas, maquinaria, or selected motorcycle applications, you should match the bearing configuration to your actual operating conditions.
con más de 20 años de experiencia en fabricación, a 5,000 m² fábrica, aproximadamente 3 million bearings of monthly output, y soporte de ingeniería OEM, XCCZC Bearing can help you evaluate the appropriate 6205 configuration for your equipment.
Necesito un 6205 bearing for an electric motor, motocicleta, bomba, o maquina industrial? Enviar XCCZC your required quantity, velocidad de funcionamiento, carga, tipo de sello, and application details to confirm the correct bearing configuration and request a quotation or sample.
25Oct
por XCCZC
01Abr
por XCCZC
