Standard linear ball bushings use hardened steel balls that run on a steel shaft. They work well in clean, geschmiert, and non-corrosive conditions. Jedoch, when exposed to moisture, Chemikalien, high heat, or a magnetic field, problems can arise immediately. Zum Beispiel, rust forms, grease washes away, and the bearing may seize.

Der LM12UU full ceramic (ZrO₂) Linearlager eliminates these failure mechanisms by replacing every metallic component with zirconium oxide (ZrO₂) Keramik. Infolge, it has no steel races or steel balls and requires no lubrication. This design provides smooth, precise linear motion in environments where metal bearings cannot survive.

Hauptmerkmale

1. Vollständige Immunität gegen Rost und chemische Angriffe

Water, Salzwasser, Säuren, Alkalien, Lösungsmittel, and plating solutions do not affect ZrO₂. daher, the bearing can be immersed, heruntergespült, or operated in corrosive atmospheres indefinitely without surface degradation.

2. Keine Schmierung, Keine Kontamination

No grease means no outgassing in vacuum chambers, no oil film on semiconductor wafers, and no lubricant residue in food or pharmaceutical products. Zusätzlich, there is no lubrication-based maintenance schedule. The bearing runs clean from installation to retirement.

3. Non-Magnetic and Non-Conductive for Sensitive Equipment

This bearing suits MRI machines, Elektronenmikroskope, semiconductor inspection tools, and other systems where magnetic interference or stray currents could compromise performance or safety. Unlike steel bushings, its ceramic construction provides this isolation.

4. Extended Service Life in Abrasive and Corrosive Conditions

Ceramic linear bearings generally outlast steel bearings by at least 200% in most applications. Under favorable conditions, they can last up to five times longer. This extended service life results from the absence of corrosion-driven failure and lubricant starvation.

5. Direct Dimensional Drop-In for LM12UU Housings

The 12×21×30 mm envelope matches the standard LM12UU metric bushing. daher, existing linear guide designs can be upgraded to ceramic without redesign.

Anwendungen

Halbleiter- und Reinraumausrüstung

Typical applications include wafer handling, vacuum deposition, and inspection stages. In diesen Umgebungen, dry running eliminates lubricant outgassing that could contaminate wafers or process chambers.

Chemical and Electroplating Lines

The bearing supports conveyor guides, dipping mechanisms, and pump linkages exposed to acids, Alkalien, und Galvanisierungsbäder. Because it resists corrosion, it avoids rust and chemical degradation.

Medical and Pharmaceutical Machinery

Applications include diagnostic sliders, laboratory automation, and sterile filling equipment. Außerdem, the bearing is non-magnetic, autoklavierbar, und schmiermittelfrei.

Lebensmittel- und Getränkeverarbeitung

The bearing suits washdown conveyors and packaging mechanisms where lubricant contamination and rust are unacceptable. Zusätzlich, ZrO₂ is compatible with caustic washdown and dairy-compliant applications.

High-Temperature and Cryogenic Systems

Typical uses include furnace conveyors, kiln carriages, and low-temperature handling equipment operating outside the limits of steel and grease.

Marine and Underwater Equipment

The bearing can be used in ROV actuators, subsea valve linkages, and deck machinery exposed to saltwater.

Hauptmerkmale:

1. Vollständige Immunität gegen Rost und chemische Angriffe – Water, Salzwasser, Säuren, Alkalien, Lösungsmittel, plating solutions—none of these affect ZrO₂. Das Lager kann eingetaucht werden, heruntergespült, or operated in corrosive atmospheres indefinitely without surface degradation.

2. Keine Schmierung, Keine Kontamination – No grease means no outgassing in vacuum chambers, no oil film on semiconductor wafers, no lubricant residue in food or pharmaceutical products, and no maintenance schedule. The bearing runs clean from installation to retirement.

3. Non-Magnetic and Non-Conductive for Sensitive Equipment – MRI machines, Elektronenmikroskope, semiconductor inspection tools, and any system where magnetic interference or stray currents would compromise performance or safety. Steel bushings cannot provide this isolation.

4. Extended Service Life in Abrasive and Corrosive Conditions – Ceramic linear bearings generally outlast steel bearings by at least 200% in most applications, and up to five times longer in favorable conditions, because there is no corrosion-driven failure and no lubricant starvation.

5. Direct Dimensional Drop-In for LM12UU Housings – The 12×21×30 mm envelope matches the standard LM12UU metric bushing. Existing linear guide designs can be upgraded to ceramic without redesign.

Anwendungen

  • Halbleiter- und Reinraumausrüstung – Wafer-Handling, vacuum deposition, and inspection stages. Dry running eliminates lubricant outgassing that would contaminate wafers or process chambers.

  • Chemical and Electroplating Lines – Conveyor guides, dipping mechanisms, and pump linkages exposed to acids, Alkalien, und Galvanisierungsbäder. No rust, no chemical degradation.

  • Medical and Pharmaceutical Machinery – Diagnostic sliders, laboratory automation, and sterile filling equipment. Nicht magnetisch, autoklavierbar, und schmiermittelfrei.

  • Lebensmittel- und Getränkeverarbeitung – Washdown conveyors and packaging mechanisms where lubricant contamination and rust are unacceptable. ZrO₂ is compatible with caustic washdown and dairy-compliant applications.

  • High-Temperature and Cryogenic Systems – Ofenförderer, kiln carriages, and low-temperature handling equipment operating outside the limits of steel and grease.

  • Marine and Underwater Equipment – ROV actuators, subsea valve linkages, and deck machinery exposed to saltwater.

linear bearing
corrosion-resistant ceramic bearings
self-lubricating bearing

Rezensionen

Es liegen noch keine Bewertungen vor.

Seien Sie der Erste, der eine Bewertung abgibt:12×21×30mm LM12UU ZrO2 (Zirkonoxid) Vollkeramisches Linearlager”

Ihre E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind markiert